• Limited Edition 6-Pack
• Includes CP, ND8, ND16, ND32, ND8/PL, ND16/PL
• Precise aluminum threaded design replaces stock UV filter
• New lightweight design adds as little as 1.2 grams to the gimbal
• Fits Phantom 3 Professional and Advanced ONLY

PolarPro Site Only: Free 6-pack case with each set

Overview

The PolarPro DJI Phantom 3 Professional Pack includes 6 high grade filters for aerial filming in nearly any lighting condition. PolarPro's new ultra-light high definition glass has been made specifically for use with the Phantom 3 camera and gimbal. The PolarPro Phantom 3 filters are designed to replace the stock UV filter on the Phantom 3 camera (which weighs 3 grams). This way 3 grams is removed before installing our filters. Even when adding even our heaviest filter (ND16/PL) to the gimbal, only a net increase of 3.36 grams is added to the gimbal. Each filter has a lightweight aluminum frame which threads onto the DJI Phantom 3 camera for easy installation and removal. (Note: you must remove the stock DJI UV filter before threading our filters on). The PolarPro Professional filter set gives you 6 unique options to capture epic content in any lighting condition. 

Included Filters: 

Circular Polarizer Filter (CP) (4.64g): The circular polarizer filter helps enhance aerial videos by reducing the amount of light reflecting off of the ground, leaving behind beautifully saturated colors and also improving contrast. This CP filter reduces the camera's shutter speed by 1.4 f stops. Our target shutter speed is 1/100-1/150th so normally we use this CP during the early morning hours or dusk when we don't have to knock down the shutter speed too much. 

3-Stop Neutral Density Filter (ND8) (4.06g): The 3-stop ND filters are typically what we use in medium light. This filter also helps reduce jello-effect by reducing the cameras shutter. This is our go-to filter for partly cloudy days.  

4-Stop Neutral Density Filter (ND16) (3.85g): The 4-stop ND filter is what we use on brighter days, where we need to knock the shutter down by 4 stops to achieve a shutter of 1/100-1/150th. This filter will curb nearly all jello caused by the high vibrations of the Phantom 3 motors. Weight: 

5-Stop Neutral Density Filter (ND32) (3.47g): The 5-Stop ND filter is what we use on extremely bright days. This filter is designed to take down the Phantom 3's shutter speed by 5 stops. This is a very dark filter so it should only be used where there is enough available light to reduce. We use this shooting in the desert or over snow on very bright days. 

3 Stop Polarizer (ND8/PL) (4.54g): The ND8/PL is a versatile filter, which reduces the cameras shutter speed by 3 stops while also providing polarization. Perfect for conditions that are too bright for the CP filter, the ND8/PL allows you to reduce the shutter speed 3 stops while also capturing beautifully saturated colors. 

4 Stop Polarizer (ND16/PL) (5.36g): The ND16/PL provides 4 stops of shutter speed reduction while also providing polarization. This is our go-to filter for sunny days where we want to capture saturated colors and improve saturation.

The Following guideline is a good starting point for when to use each filter while filming with your Inspire 1, Phantom 3, or Solo. The goal of this chart is to reduce the camera’s shutter speed to 1/60th to give areal videos a smooth cinematic look, rather than a choppy high shutter speed look. A popular way of filming areal video is to have your shutter speed at double the frame rate. So if you are shooting 1080/60, then you want to try to achieve a 1/120th shutter speed. Or if filming 4K/30 or 24 you will want to be near 1/60th shutter speed.